datasheets.com EBN.com EDN.com EETimes.com Embedded.com PlanetAnalog.com TechOnline.com   UBM Tech
UBM Tech
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss

Linearity testing for G.hn PLC line drivers

50%
50%
mouradbey
mouradbey
9/16/2013 3:49:28 PM
User Rank
Newbie
Homeplug AV2 line driver
Hi;

I have two questions in the subject of Homeplug AV2 line driver:

* how calculate the crest factor PAR?

* Does Intersil produce a line driver which works well with Homeplug AV2.

Thank you.

50%
50%
B_Albing
B_Albing
9/22/2013 9:12:45 PM
User Rank
Editor
Re: Homeplug AV2 line driver
@mouradbey - regarding the possibility of an Intersil IC for this application, have you checked on www.intersil.com or checked with an Intersil FAE to see if they can provide an answer?

50%
50%
latest blogs
Over time in the semiconductor industry, several technology shifts have required EDA tool vendors to develop new solutions. We are once again at such a shifting point in the traditional methods of design.
As an engineer it is always rewarding when one can calculate an expected result and see the measurement in the lab line up with that calculation.
With IPv6 providing an address space of more than 280 billion, the Internet usage paradigm has shifted into a new phase.
This blog describes the last failure type: SEGR.
The following tutorial nugget comes courtesy of Greg Waterfall of Texas Instruments, one of our experts.
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS