Advertisement

Article

16-Bit, 80-Msps ADC offers noise reduction in data conversion systems

The LTC2259-16 provides a pin-compatible upgrade to the existing LTC2259-14 family of 14-bit low power ADCs, offering the lowest power dissipation for a single 16-bit ADC with double data rate (DDR) CMOS/LVDS outputs.

In addition to offering lower power, the LTC2259-16 integrates two useful features for reducing digital feedback, including alternate bit polarity (ABP) mode and a data output randomizer. The features, in combination with low power, ease the task of designing with high speed ADCs in a wide variety of applications, including HD broadcast cameras, IMO radar, Ethernet testers, portable test and instrumentation, software-defined radios and cellular basestations.

Digital feedback occurs when energy from ADC outputs couples back into the analog section, causing interaction that appears as odd shaping in the noise floor and spurs in the ADC output spectrum. The worst situation is at mid-scale, where all outputs are changing from ones to zeroes, or vice versa, generating large ground currents that couple back into the input.

To combat this effect, the LTC2259-16's proprietary alternate bit polarity (ABP) mode inverts all of the odd bits before the output buffers to equalize the number of ones and zeroes switching. This method effectively cancels the large ground plane currents that contribute to digital feedback. In addition to the alternate bit polarity mode, an optional data output randomizer is also available for reducing interference from the digital outputs. The randomizer decorrelates the digital output to reduce the likelihood of repetitive code patterns that couple back into the ADC input, causing unwanted tones in the output spectrum. Both digital feedback reduction techniques improve spurious free dynamic range (SFDR) performance by 10-15 dB.

Operating from a low 1.8 V analog supply, the LTC2259-16 offers signal to noise ratio (SNR) performance of 73.1 dB and SFDR of 88 dB at baseband. Ultralow jitter of 0.17 psRMS allows undersampling of IF frequencies with excellent noise performance. The LTC6406 is a recommended rail-to-rail ADC driver for maintaining LTC2259-16's AC performance.

The LTC2259-16's digital outputs can be set to full rate CMOS, DDR CMOS, or DDR LVDS. Double data rate digital outputs allow data to be transmitted on both the rising edge and the falling edge of the clock, reducing the number of data lines needed by half. A separate output power supply allows the CMOS output swing to range from 1.2 V to 1.8 V.

Offered in a 6 mm x 6 mm QFN package, the LTC2259-16 includes a clock duty cycle stabilizer circuit to facilitate non-50 percent clock duty cycles, programmable digital output timing, programmable LVDS output current and optional LVDS output termination. These features combine to make the data transmission between the ADC and the digital receiver more flexible.

Availability and Pricing

The LTC2259-16 joins a family of pin-compatible 14 and 12-bit ADCs, with sampling rates ranging from 25 Msps to 150 Msps, and power dissipation of 35 mW to 149 mW, respectively. LTC2259-16 is in full production with pricing starting at 35.00 US Dollars each in 1,000-piece quantities.

Related link: LTC2259-16

0 comments on “16-Bit, 80-Msps ADC offers noise reduction in data conversion systems

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.