2A step-down converter meets portable system power needs

Santa Clara, Calif.—Advanced Analogic Technologies Inc. (AnalogicTech) announced the AAT1153, a 1.2-MHz constant frequency, current mode step-down converter capable of delivering up to 2A of output current.

Available in a compact, 3×3-mm TDFN package, the AAT1153 synchronous device helps portable system designers meet rising power requirements and still deliver a small, power-efficient product. The AAT1153 supplies up to 2A output current from a 2.5V to 5.5V input. Output voltage can range from 0.6V to VIN. Current mode operation offers excellent line and load transient response.

The step-down converter extends battery life by running at efficiency levels as high as 95% and can achieve 90% efficiency at its full rated 2A load. It also uses low RDS(ON) internal switches, which can run at 100% duty-cycle for low-dropout operation. In addition, light load operation minimizes output ripple for noise sensitive applications.

Using a high 1.2 MHz constant switching frequency, the AAT1153 allows designers to use small external components including lower cost ceramic capacitors. The internal slope compensation setting helps minimize system footprint by allowing the designer to use smaller inductor values.

The AAT1153 offers both short-circuit and over-temperature protection. Soft start circuitry limits current surge at input and eliminates output voltage overshoot. It also offers a low shutdown current of < 1 µA. Qualified across the -40°C to +85°C temperature range.

Pricing: $1.15 in 1K quantities.
Availability: Now.
Datasheet: Click here.

Advanced Analogic Technologies Inc.,

0 comments on “2A step-down converter meets portable system power needs

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.