The AD9648 is a low-power, high-speed, 14-bit dual A/D converter that consumes 102 mW/channel at 125 MSPS (mega samples per second) and features SFDR (spurious-free dynamic range) performance of 91 dBc at 70 MHz. With IF sampling frequencies up to 200 MHz, the AD9648 is a good choice for designers looking for a dual high-speed A/D converter to build multimode digital receivers.
ADI also released the AD9642 14-bit A/D single-channel converter. With a 5 mm x 5 mm package size — 30 percent smaller than competing products — and IF sampling frequencies up to 350 MHz, the AD9642 saves board space and supports wide bandwidths up to 125MHz, according to the company. It features an SNR (signal-to-noise ratio) of 72.2 dBFS and SFDR of 90 dBc at base band while consuming 360 mW at 250 MSPS.
AD9648 key features :
SNR = 74.5 dBFS at fIN up to 70 MHz at 125 MSPS
ENOB of 11.8 at fIN up to 70 MHz at 125 MSPS (-1.0 dBFS)
SFDR = -91 dBc at fIN up to 70 MHz at 125 MSPS (-1.0 dBFS)
You must verify your email address before signing in. Check your email for your verification email, or enter your email address in the form below to resend the email.
Please confirm the information below before signing in.
{* #socialRegistrationForm *}
{* firstName *}
{* lastName *}
{* displayName *}
{* emailAddress *}
By clicking "Sign In", you confirm that you accept our terms of service and have read and understand privacy policy.
{* /socialRegistrationForm *}
Registration
Please confirm the information below before signing in. Already have an account? Sign In.
{* siteName *}
By clicking "Create Account", you confirm that you accept our terms of service and have read and understand privacy policy.
{* /registrationForm *}
Thank You for Registering
We have sent a confirmation email to {* emailAddressData *}. Please check your email and click on the link to verify your email address.
0 comments on “Analog Devices AD9648 and AD9642 A/D converters”