Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Content posted in July 2012
Page 1 / 2   >   >>
ADC Guide, Part 8: ADC reference basics pt. 2
7/25/2012   Post a comment
Understand how these lesser-understood parameters can affect signal and conversion integrity
Class G stereo amplifier IC with digital I2S interface offers power saving benefits
7/25/2012   Post a comment
Toshiba Electronics Europe has expanded its family of ultra-low power stereo headphone amplifier ICs with a new class-G device that claims to combine outstanding audio performance with a digital I2S interface.
TI pursues smart-meter sector with ADS131E08 lowest power AFEs
7/19/2012   Post a comment
TI released its first integrated e-metering product line that it claims offers the lowest power, delivering just 2mW per channel.
Map colors of a CIE plot and color temperature using an RGB color sensor
7/17/2012   1 comment
An RGB color sensor today can be used in a wide variety of lighting applications. Typical examples include industrial lightning, biomedical equipment displays, chemical analysis, TV backlight control, automotive interior and exterior lighting, and decorative or “mood” lighting.
Modern techniques to prevent hacking in medical systems
7/16/2012   Post a comment
The advent of electronics has transformed medical devices to become smarter and more convenient to our daily lives. But recent headlines of hacking point out a consternation of electronics. Medical device designers need to understand new tools and design techniques that can prevent hacking and illicit modification.
ADC Guide, Part 7: ADC reference basics pt. 1
7/12/2012   1 comment
Understand how these lesser-understood parameters can affect signal and conversion integrity
Dual 14-bit A/D converter cuts power consumption 22%
7/11/2012   Post a comment
A two-channel, high-performance 14-bit, 125-MSPS A/D converter by Analog Devices, reduces total power consumption by 22% over competing solutions.
SIGNAL CHAIN BASICS #67: How to design a two-to-four wire converter for RS-485
7/10/2012   Post a comment
Multipoint data communication networks such as Profibus, Modbus, and BACnet often require interoperability of RS-485 two-wire, half-duplex and four-wire, full-duplex bus systems.
Page 1 / 2   >   >>

latest blogs
The triboelectric effect is defined as a small amount of static electricity generated by the contact and movement of surfaces, used to generate energy that is collected and stored to power sensors and electronics at very low power
The utilization of electronics in medical applications could effectively enhance the quality of life of patients and prevent many cardiovascular distresses: this is confirmed by the result of an observational study, about the CPAP device
This blog series deals with the potential of the utilization of smart electronic ICs in medical care applications; these ICs are produced by companies in the field of semiconductors such as STMicroelectronics which has a broad portfolio of ICs for medical applications
There is rising interest in alternative energy schemes and electric vehicles (EVs) which means there is a growing need in making it possible for power to flow efficiently in both directions.
The industries sector is progressively increasing utilization of IoT technology to make the industrial processes automated in a very intelligent way.
flash poll
educational resources
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS