Advertisement

Article

Austriamicrosystems : Incremental linear magnetic encoder ICs meet reliability challenges in harsh environments



Austriamicrosystems has expanded its magnetic sensor product portfolio to include the AS5304 and AS5306, two high performance linear Hall sensor ICs.

The AS5304 and AS5306 ICs feature austriamicrosystems’ new line of magnetic encoders for linear and off axis motion sensing applications. The devices provide an easy-to-use, start & play solution for motion control applications as they require no configuration or calibration by the host controller after power up or during operation. The new linear magnetic encoder IC’s can be used in a variety of motion sensing applications found in medical, industrial and consumer products.

“The measurement performance and reliability of motion control systems employing traditional optical encoder sensors can be severely impacted by dirt, dust and grime contaminants. Due to the principles of magnetic sensing, the AS5304 and AS5306 encoder ICs are immune to these contaminants and can therefore significantly contribute to a higher reliability of motion control applications”, says Matjaz Novak, Marketing Director Industry & Medical at austriamicrosystems.

Similar to optical sensors, the AS5304 and AS5306 provide incremental A & B quadrature output signals with 160 steps per magnet pole pair, and an index pulse that is applied once every pole pair. The index pulse together with the quadrature output signals allow designers to develop applications that track the absolute position once referenced from a known starting position after power up. The AS5304 and AS5306 ICs can achieve resolutions of 25µm and 15µm, respectively.

In addition to standard linear positioning applications where a magnet strip moves laterally from left to right or vice versa over the IC, the AS5304 and AS5306 encoder ICs also support rotary off axis applications by using a circular ring magnet mounted on the outside of a rotating shaft. Rotary off axis encoding solutions can be used in applications where the magnet cannot be placed directly at the end of a rotating shaft due to mechanical constraints.

The AS5304 and AS5306 devices are available in a 20-lead 5x5mm TSSOP device and are specified to operate at 5V over a temperature range of -40C to +125C. Product information including datasheets and application notes is available at http://www.austriamicrosystems.com/Linear-Encoders

About austriamicrosystems

austriamicrosystems is a leading designer and manufacturer of high performance analog ICs, combining more than 25 years of analog design capabilities and system know-how with its own state-of-the-art manufacturing and test facilities. austriamicrosystems leverages its expertise in low power and high accuracy to provide industry-leading customized and standard analog products. Operating worldwide with more than 1,000 employees, austriamicrosystems focuses on the areas of power management, sensors & sensor interfaces, portable audio and car access in its markets Communications, Industry & Medical and Automotive, complemented by its Full Service Foundry activities.

Technical Contact
austriamicrosystems AG
Josef Janisch
Product Marketing Manager
Tel: +43 (0) 3136 500 5464
Fax: +43 (0) 3136 500 5420


Note: The above text is the public part of the press release obtained from the manufacturer (with minor modifications). EETimes Europe cannot be held responsible for the claims and statements made by the manufacturer. The text is intended as a supplement to the new product presentations in EETimes Europe magazine.


0 comments on “Austriamicrosystems : Incremental linear magnetic encoder ICs meet reliability challenges in harsh environments

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.