REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Stability Issues for High Speed Amplifiers: Introductory Background and Improved Analysis, Insight #5
2/3/2019

< Previous   Image 3 of 19      Next >

Figure 3
Small Signal (non-slew limited) Step Response Overshoot vs LG phase margin.

Small Signal (non-slew limited) Step Response Overshoot vs LG phase margin.

< Previous   Image 3 of 19      Next >

Return to Article

CameronRobertson
CameronRobertson
4/23/2019 2:09:50 AM
User Rank
Newbie
The long route
Great insights which are worth all the effort for a proper system, everytime! Some setup engineers refuse to go the long way because they just seem too lengthy a process and might even incur additional costs. This is really worrying regardless of the nature of the event that the system is being used at.

50%
50%
More Blogs from The Signal Sped Up
Here, an updated Loop Gain (LG) simulation approach will be first detailed and then used to show paths into, and out of, low Phase Margin (PM) conditions for a current feedback amplifier.
Emerging issues and paths to improve the Phase Margin (PM) for VFA stages that have slipped into perhaps an unsuitably low margin condition
The more recent Fully Differential Amplifiers (FDA) offer both CFA and VFA versionsThe CFA based versions will also have poor DC accuracy while more recent “precision” VFA based FDAs can provide much improved DC accuracy. Those VFA-based FDAs do come with some added DC error sources beyond the typical op amp terms that will be described here
This part 3 will progress through the different VFA approaches with Part 4 moving on to CFA and FDA DC precision considerations
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS