Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Stability Issues for High Speed Amplifiers: Introductory Background and Improved Analysis, Insight #5

< Previous   Image 4 of 19      Next >

Figure 4
SSBW extension from LG=0dB Fxover vs Phase Margin at Crossover.

SSBW extension from LG=0dB Fxover vs Phase Margin at Crossover.

< Previous   Image 4 of 19      Next >

Return to Article

4/23/2019 2:09:50 AM
User Rank
The long route
Great insights which are worth all the effort for a proper system, everytime! Some setup engineers refuse to go the long way because they just seem too lengthy a process and might even incur additional costs. This is really worrying regardless of the nature of the event that the system is being used at.

More Blogs from The Signal Sped Up
There is an occasional caution that even unity-gain stable Voltage Feedback Amplifiers (VFAs) risk instability in inverting attenuator applications
Here, some typical applications particularly suited to a decompensated VFA solutions will be shown with phase margin improvement techniques where needed.
Here, model testing steps will be shown for the VFA then external adjustments to match reported data sheet numbers will be shown
The most recent VFA FDAs focus on lower power, precision, solutions more aimed at Successive Approximation Register (SAR) and delta sigma ADC support. Those will be focus in this FDA stability discussion - but the concepts are backward compatible to the earliest VFA FDAs.
Here, an updated Loop Gain (LG) simulation approach will be first detailed and then used to show paths into, and out of, low Phase Margin (PM) conditions for a current feedback amplifier.
flash poll
educational resources
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS