REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
The Filter Wizard Remastered

One giant squeak for Mankind

Kendall Castor-Perry
steve.taranovich
steve.taranovich
4/10/2019 5:52:22 PM
User Rank
Blogger
Re: Squeak
@Morgan Beaglemann---I agree---I am getting IT to look at fixing the font to make it black---thanks for the comment

50%
50%
Morgan Beaglemann
Morgan Beaglemann
4/10/2019 3:52:46 PM
User Rank
Student
Re: Squeak
Thanks! Was not the schematic, but the light grey of the text against the white background! I ended up printing it to read. Have a good one, Mart

50%
50%
studleylee
studleylee
4/10/2019 3:42:43 PM
User Rank
Newbie
Re: Squeak
If you do a ctrl-mousewheel on the clicked image you can zoom enough to read it's blurriness. The LTspice schematic says it all so not really worth mentioning.

It's interesing how the older articles don't really follow the schematic conventions of today

The circuit is much more recognizable if the gnd and -9v(gnd=>+9v and -9v=>gnd) labels are swapped and the entire thing redrawn upside down with respect to the original.

The signal souce and output load then ref'd to the 'new' gnd.

 

50%
50%
Morgan Beaglemann
Morgan Beaglemann
4/10/2019 9:47:40 AM
User Rank
Student
Squeak
Great article on a topic I have never heard of. Only one problem, the font is of a grey-like color and is difficult to read; in fact neigh impossible to read. I havd to take the time to print in order to make it readible.

Art and creativity are one thing, but aren't you supposed to get the message across? Isn't that why we communicate?

Respectfully,

Martin

0%
100%
More Blogs from The Filter Wizard Remastered
Well, it turns out that we can perform impedance scaling on actual components; let’s look at how we deploy key properties of the humble op-amp to do this.
Designing a filter using a spreadsheet. No sophisticated charts, no pole zero relationships, determination of a response type, none of those overly complex equations I learned in school.
We set out to eliminate the inductors in our LC lowpass filter – and ended up doubling the number of them! We’ll see shortly just how these can be made to disappear in one mathematical stroke
Using optimization to design circuits (some might call it organized guesswork – for some algorithms, that’s a pretty good description) isn’t a new insight.
Why did I want to set my source and load resistances to the same value?
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS