REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Analog Angle

What to do about analog inaccuracies?

Bill Schweber
DaveR1234
DaveR1234
7/5/2019 6:03:58 AM
User Rank
Newbie
cancellation
Back in the early days of radio, 60 cycle hum was a problem  because of insufficient power supply filtering getting in the audio stages of the vacuum tube radio.  Someone cleverly injected an out-of-phase 60 cycle signal in series with the speaker drive called a hum-bucking-coil.

Don't forget the most popular technique invented by Alexander Bell and widely used today, twisted wires.

A few others: current mirrors, diffrential amplifiers, using a diode to compensate for a base-emitter voltage

On the mechanical side, don't grandfather clocks use a combinaton of alloys and linkages in the pendulum to keep the length constant over temperature?

50%
50%
More Blogs from Analog Angle
Even though there are a near-infinite number of basic and advanced antenna designs in widespread use, there’s a continuous need for new ones
There’s one term that’s getting a lot more attention these days: passive intermodulation, or simply PIM. What is PIM?
As technology evolves and advances, long-established parameters may no longer be relevant or useful, and new ones take their place.
It has to hurt when your released product is cancelled and goes into the dumpster, but should it?
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS