REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
The Signal Sped Up

DC precision considerations for high speed amplifiers, Insight #3

Michael Steffes
Page 1 / 3 Next >
Tucson_Mike
Tucson_Mike
12/5/2018 9:53:52 AM
User Rank
Blogger
Re: Good read
Hey Soufiane, 

It is not just "modern" designers that approach decomp parts with some trepidition. It has always been uphill from the first decomp part I was involved in (the CLC425) to these most recent blazing fast decomp VFA like the OPA855 (8GHz GBP). If you are tasked with a transimpedance design, most designers recognize the need for decomp and deal with it. Otherwise, it is a tough sell even with clear input noise and LSBW advantages. There are certainly added stability risks - but good models can mitigate those. Looking industrywide, I would say LTC has made a commitment to decomp (even more than I have) while Maxim recently spun out a series of decomp CMOS devices. Nice knob to use in product development if you understand the tradeoffs. 

50%
50%
soufiane_ben
soufiane_ben
11/30/2018 7:26:15 PM
User Rank
Newbie
Good read
Hi Michael:

I think some designers should start by selecting the "right" process. There are compimentary processeses which lend themselves better for optimized speed/power ratios. On the other hand, most "modern" engineers seem to fear the idea of a decompenated op amp, think OP37 which is still one of the best decomp op amps ever made in my opinioon. 

I think that soon we will see increased needs for high speed and DC precision, this is particularly true for T&M and automotive but I can also see this need in medical instrumentation for instance. 

50%
50%
More Blogs from The Signal Sped Up
There is an occasional caution that even unity-gain stable Voltage Feedback Amplifiers (VFAs) risk instability in inverting attenuator applications
Here, some typical applications particularly suited to a decompensated VFA solutions will be shown with phase margin improvement techniques where needed.
Here, model testing steps will be shown for the VFA then external adjustments to match reported data sheet numbers will be shown
The most recent VFA FDAs focus on lower power, precision, solutions more aimed at Successive Approximation Register (SAR) and delta sigma ADC support. Those will be focus in this FDA stability discussion - but the concepts are backward compatible to the earliest VFA FDAs.
Here, an updated Loop Gain (LG) simulation approach will be first detailed and then used to show paths into, and out of, low Phase Margin (PM) conditions for a current feedback amplifier.
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS