REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Integrated RF-sampling transceivers enable fast frequency hopping, multiband and multimode operation
2/2/2019

< Previous   Image 6 of 6   

Figure 6
Click here for larger image 
Frequency transition on the oscilloscope

Click here for larger image

Frequency transition on the oscilloscope

< Previous   Image 6 of 6   

Return to Article

More Blogs from Signal Chain Basics
How to generate the open-loop SPICE simulation curves: Open or “break” the loop while injecting a small signal into a high-Z node and look at the response at different points in the loop
The PLL architecture is an effective approach to creating very linear ramping waveforms that are useful for radar applications. That being said, one consideration is how fast the ramp can change and still have the PLL track it. The loop filter needs to be able to allow the frequency to slew fast enough, and you need to take measures to avoid cycle slipping
How can you accurately measure this impedance to give reliable lead-off detection in ECGs?
Most voltage amplifier circuit offsets are a result of the amplifier’s input voltage offset, input bias current and input offset currents.
Most people are not familiar with electromechanical spinning. My goal here is to attempt to explain brushless-DC motors simply
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS