REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss

3D Printing

50%
50%
Page 1 / 2   >   >>
uchiha
uchiha
1/8/2015 12:07:56 AM
User Rank
Artist
Re: Re : 3D Printing
@sachinEE : I they have the capability. To be honest, I haven't tried it as such but surely they should have taken it into consideration while developing such a  technique.

50%
50%
uchiha
uchiha
1/8/2015 12:06:16 AM
User Rank
Artist
Re: Re : 3D Printing
I Don't think it will affect the job market as such because its just another technology to assist not a robot to do or replace humans.

50%
50%
SachinEE
SachinEE
12/31/2014 5:02:54 PM
User Rank
Master
Re: Re : 3D Printing
The customisation value of 3D printing and the ability to produce small production batches on demand is a sure way to engage consumers AND reduce or negate inventories and stock piling 

@uchiha, what if we want to create large production batches ? Do you think 3D printing can handle large product batches as well or do you think they are slower compared to traditional manufacturing methods ?

50%
50%
SachinEE
SachinEE
12/31/2014 4:59:27 PM
User Rank
Master
Re: Re : 3D Printing
3D printing would have the potential to create new industries and completely new professions, such as those related to the production of 3D printers.

@uchiha, do you think 3D printing will also impact in loss of jobs because it reduces lot of manual effort and we can easily automate manufacturing process ?

50%
50%
SachinEE
SachinEE
12/31/2014 4:57:51 PM
User Rank
Master
Re: 3D Printing Materials
There is now a wide variety of different material types, that are supplied in different states (powder,filament, pellets, granules, resin etc).

@uchiha, thanks for sharing this info. Which materials are being used in 3D printing ?  How much reliable those materials are ?

50%
50%
uchiha
uchiha
12/29/2014 12:45:01 PM
User Rank
Artist
Re: Re : 3D Printing
The most basic, differentiating principle behind 3D printing is that it is an additive manufacturing process. And this is indeed the key because 3D printing is a radically different manufacturing method based on advanced technology that builds up parts, additively, in layers at the sub mm scale.

50%
50%
uchiha
uchiha
12/29/2014 12:36:43 PM
User Rank
Artist
3D Printing Materials
The materials available for 3D printing have come a long way since the early days of the technology. There is now a wide variety of different material types, that are supplied in different states (powder,filament, pellets, granules, resin etc).

50%
50%
uchiha
uchiha
12/29/2014 12:33:48 PM
User Rank
Artist
Re: Re : 3D Printing
3D printing would have the potential to create new industries and completely new professions, such as those related to the production of 3D printers.

50%
50%
uchiha
uchiha
12/29/2014 12:27:02 PM
User Rank
Artist
Re: Re : 3D Printing
@chirshadblog : One of the key factors behind this statement is that 3D printing has the potential to bring production closer to the end user and/or the consumer,thereby reducing the current supply chain restrictions.

50%
50%
uchiha
uchiha
12/29/2014 12:23:21 PM
User Rank
Artist
Re: Re : 3D Printing
@yalanand : The customisation value of 3D printing and the ability to produce small production batches on demand is a sure way to engage consumers AND reduce or negate inventories and stock piling — something similar to how Amazon operates its business.

50%
50%
Page 1 / 2   >   >>
latest blogs
Removing the vuvuzela narrow-band noise was presenting challenges to broadcast engineers
This article discusses how using a single synchronous buck controller can output the most common voltage rails, and accommodate a wide range of operating input voltages from 3V to 40V, and at a reasonable BOM cost.
This article explains how the latest-generation SiC FETs are ideally suited to new inverter designs with lower losses than IGBTs and proven robustness against short circuits, even at high temperatures and under repetitive stress
There’s a further cool thing you can do with a spreadsheet that most SPICEs can’t. That’s to use the spreadsheet ‘solver’ functionality to adjust component values in the search for a better-fitting circuit – or even to find a set of component values for a circuit you can’t otherwise design.
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS