Advertisement

Article

Dual buck converter integrates a 700 mA DC-DC to power 3G PA

Maxim Integrated Products introduces the MAX8896, a dual step-down converter designed for powering WCDMA/NCDMA PA (power amplifier) modules and RF transceivers.

The 4 mm2 device integrates a high-efficiency, PA step-down converter that is optimized for medium- and low-power transmission, and includes a bypass FET for powering the PA directly from the battery during high-power transmission. By using the MAX8896 between the battery and RF-transceiver/PA, designers can reduce current consumption by up to 50 percent under typical operating conditions, thus extending battery life. The MAX8896 also includes an RF step-down converter that supplies a high-PSRR, low-noise LDO (low-dropout linear voltage regulator) to provide a high-efficiency voltage supply for the RF transceiver. The MAX8896 is well suited for multiband WCDMA/NCDMA applications such as cellular handsets, netbooks, and smartphones. The MAX8896 is available in the Infineon SMARTi UE HSPA RF transceiver and the XMM 6160 mobile phone platform, providing users with best-in-class battery life.

Supporting 1.9 A of peak current, the integrated low-impedance 140 milliohm (typ) bypass FET provides maximum power with minimum dropout, even under low-battery conditions. During high-power transmission, the bypass FET automatically turns on if the required output voltage is within 99 percent of the input voltage, and the PA step-down converter is forced into a 100 percent duty cycle.

The RF step-down converter has 94 percent peak efficiency with a 2 MHz fixed switching frequency.
The device supports a 100 percent duty cycle, and provides a fixed 3.1 V output voltage with 7#177;2 percent output-voltage accuracy. The high-PSRR (65 dB), low-noise (16 microVrms), 2.8 V LDO delivers a guaranteed 200 mA output current. The low-noise output makes this LDO ideal for RF transceiver biasing or applications that require an exceptionally clean power source.

Availability and Pricing

The MAX8896 is offered in a tiny, 2 mm x 2 mm, 16-bump UCSP package (0.7 mm height, max) and is fully specified over the -40 to +85 degrees Celsius extended temperature range. Prices start at $1.92 (2500-up, FOB USA). Samples and evaluation kits are available upon request.

Datasheet:

MAX8896

0 comments on “Dual buck converter integrates a 700 mA DC-DC to power 3G PA

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.