Four automotive converters fit in a 25mm² IC

Sunnyvale, Calif.—Maxim Integrated Products has introduced the MAX16922, a 2.2MHz, high-voltage, four-channel power-management IC (PMIC) optimized for automotive applications that require up to four power rails at medium power levels.

The MAX16922 integrates one high-voltage step-down converter, one low voltage step-down converter, two low-voltage LDO regulators, and a power-good reset output for voltage monitoring-all in a compact (5mm x 5mm) footprint.

The high-voltage step-down converter is capable of delivering 1.2A and is optimized for operation in the normal automotive battery range of 8V to 18V. However, it is able to operate during load-dump transients up to 42V and cold-crank events down to 3.5V. The other three power rails are cascaded from the output of the high-voltage converter or one of the other converters. Each has a separate supply pin to allow flexibility in configuration and maximum conversion efficiency. The 600mA step-down converter operates with a 2.7V to 5.5V supply voltage, while the two 300mA low-dropout linear regulators operate with a supply from 1.7V to 5.5V.

To reduce switching noise, the 600mA step-down converter operates 180 degrees out-of-phase with the high-voltage step-down converter and can be operated in forced-PWM mode. The output voltages of all four channels are factory-trimmed to fixed values. Protection features include overcurrent limiting and thermal shutdown.

The MAX16922 is fully specified over the -40°C to +125°C automotive temperature range. It is AEC-Q100 qualified and available in thermally enhanced, 20-pin TQFN (5mm x 5mm) and TSSOP (4.5mm x 6.5mm) packages.

Pricing: Starts at $4.92 (1000-up, FOB USA).
Availability: Now.
Datasheet: Click here.

Maxim Integrated Products,

0 comments on “Four automotive converters fit in a 25mm² IC

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.