Advertisement

Article

Hall-effect sensor interface provides flexibility through analog and digital outputs

Sunnyvale, Calif.—Maxim Integrated Products has introduced the MAX9621, a dual, 2-wire, Hall-effect sensor interface with analog and digital outputs.

The MAX9621 enables the microprocessor to monitor the status of Hall-effect sensors either through the analog output by mirroring the sensor current for linear information or through the filtered digital output. The input current threshold can be programmed for the digital output. A high-side current-sense architecture eliminates the need for a ground-return wire without introducing ground shift, thus reducing wiring cost by 50%. The MAX9621 is well suited for automotive body controllers such as window lifters.

The MAX9621 protects sensors from supply transients up to 60V and short-to-ground conditions, which enables it to withstand the harsh operating conditions in automotive applications. The device features a minimum of 50microseconds blanking time following Hall-effect sensor power-up or restart. A low-current (1microamp, typ) shutdown mode conserves power.

Available in a 3mm x 5mm, 10-pin microMAX package, the MAX9621 operates from a 5.5V to 18V supply and is fully specified over the -40°C to +125°C automotive temperature range.

Pricing: Starts at $0.87 (1000-up, FOB USA).
Availability: Now.
Datasheet: Click here.

Maxim Integrated Products, www.maxim-ic.com

0 comments on “Hall-effect sensor interface provides flexibility through analog and digital outputs

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.