Advertisement

Article

HDMI/DVI control switch matches any voltage level

Sunnyvale, Calif.—Maxim Integrated Products has developed a low-frequency HDMI/DVI control switch called the MAX4929E, which is capable of switching between two digital video signals going into a single monitor or between multiple HDMI/DVI connectors while maintaining a high level of signal integrity.

The MAX4929E features three independent voltage inputs that allow the user to match any voltage level encountered in switching without additional components. The device provides all the switching, logic-level matching, and ESD protection required to complete a 2:1HDMI/DVI switch, and is well-suited for use in HDTV receivers and monitors.

When combined with the MAX4886 quad, high-speed, HDMI/DVI 2:1 TMDS digital video switch, the MAX4929E provides the ability to multiplex two HDMI/DVI video streams into a single port. This two-chip solution enables the design engineer to address multiple applications in the consumer video and PC marketplace, such as desktop PCs, HDTVs, digital projectors, and other video applications.

For a full story on the MAX4886, Click here.

To support the +5V signal required by HDMI/DVI systems, the MAX4929E features a 4.5V to 5.5V V+ range. This switch also provides two enable inputs that allow the device to operate either in normal mode or a high-impedance state. This feature makes it possible to control two MAX4929Es with a single control bit, thus creating a 4:1 equivalent switch that uses a minimum of external components. To further save cost, the MAX4929E provides high 15kV ESD protection on all external I/Os, thereby eliminating the need for external protection.

The MAX4929E operates from a single 5V supply or dual/triple supplies and is fully specified over the -40°C to +85°C extended temperature range. It is available in 20-pin QSOP and space-saving, 4-mm x 4-mm, 20-pin TQFN packages.

Pricing: Starts at $0.85 (1000-up, FOB USA).
Availability: Now.
Datasheet: Click here.

Maxim Integrated Products, www.maxim-ic.com

0 comments on “HDMI/DVI control switch matches any voltage level

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.