REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 9   >   >>
SunitaT0
SunitaT0
10/31/2014 1:37:09 PM
User Rank
Master
Re: Infograph
i think solar is reacing that state and LED lighting is reaching that state. EV, not yet.

@bshenoy, thanks for sharing your opinion. That is a very good news. I hope this will bring the cost of the solar so that every can opt for this technology.

50%
50%
SunitaT0
SunitaT0
10/31/2014 1:34:54 PM
User Rank
Master
Re: big picture...RE (med)
Having said this though, if ESD is considered early in the board layout process, it can eliminate many headaches and in the worst case, board spins.

@jim_colby, I agree with all the points you mentioned. Teams have shorter release-to-market targets which gives teams very less time to concentrate on ESD. I think teams should put extra effort in ESD testing so that it helps them to improve the reliability.


50%
50%
bshenoy
bshenoy
10/31/2014 1:26:21 PM
User Rank
Newbie
Re: Infograph
@sunita - just like many emerging markets, once costs come down, user adoption gains critical mass, and the industry can survive one its own with gov subsiidies, penetration rate will go up and the market will transition from emerging to a maturing market. i think solar is reacing that state and LED lighting is reaching that state. EV, not yet.

Bharat

50%
50%
jim_colby
jim_colby
10/31/2014 12:51:27 PM
User Rank
Newbie
Re: big picture...RE (med)
@SunitaT0, looking at this from a Design Engineer's standpoint, I can understand that meeting all of the functional requirements is job #1.  Considering the complexity of today's devices (both HW and SW), it easy to see why that is the primary focus.  Add on deadlines and release-to-market targets, and it just gets worse.  Having said this though, if ESD is considered early in the board layout process, it can eliminate many headaches and in the worst case, board spins.

50%
50%
SunitaT0
SunitaT0
10/31/2014 12:34:35 PM
User Rank
Master
Re: IP reuse
Customers/peoples at enterprise levels are embracing cloud by knowing all the pit falls.

@Myanalog, Unfortunately customers are forced to adopt cloud technology because all the industry is moving towards that. I think Cloud related shorcomings will be addressed soon.

50%
50%
SunitaT0
SunitaT0
10/31/2014 12:31:28 PM
User Rank
Master
Re: big picture...RE (med)
There are a number of good comments on issues like ESD protection.  While many designers don't think about this issue until very late in the design phase, the sooner it is considered, the more likely that an effective solution will be realized on the first pass.

@jim_colby, I totally agree with you. I am not sure why ESD protection issues are not taken of in the initial phase of project. I think designers should use their prior experience to forsee the ESD issues and do the necessary changes to the circuit.

50%
50%
SunitaT0
SunitaT0
10/31/2014 12:15:15 PM
User Rank
Master
Re: Infograph
And also I would like to know the return on investment with the solar system?

@Ranasinghe, ROI varies and as expected less expensive the solar power system and the higher the regular electricity rate, the faster the payback time is on a system. Over the last two decades, the cost of solar energy systems has come down seven fold.

50%
50%
SunitaT0
SunitaT0
10/31/2014 12:09:20 PM
User Rank
Master
Re: Infograph
 They are not always be available where and when needed

@Netcrawl, I agree with you. I think one solution could be to develop local models which can identify the availability of solar energy and wind energy which can help us to improve the interface between production and transmission unit.

50%
50%
SunitaT0
SunitaT0
10/31/2014 12:06:52 PM
User Rank
Master
Re: Infograph
Recently there was a paper on the usage of the cellulose for the solar energy tapping that increased the efficiency, the battery technology is fast changing

@amrutah, very interesting. Can you please share the link. I am curious to know how cellulose is interface with electronics equipments. 

50%
50%
SunitaT0
SunitaT0
10/31/2014 11:27:29 AM
User Rank
Master
Re: Infograph
I think the challenge in the renewable energy can be overcome with utilization of innovative technologies like High Voltage DC (HVDC) and Flexible AC transmission system (FACTS) devices which has the ability to cope with the new challenges.

@Netcrawl, I agree with you. Technology like FACTS will help us to enhance controllability and increase power transfer capability of the network. So this can help us to Iincrease the reliability of AC grids and reduce power delivery costs.

50%
50%
<<   <   Page 2 / 9   >   >>


latest blogs
How can you accurately measure this impedance to give reliable lead-off detection in ECGs?
Fast switching transitions can yield some disadvantages. Interference in the frequency range of the switching transitions between approximately 20 MHz and 200 MHz increases dramatically.
The U-channel format consists of an open frame PSU mounted into a U-shaped aluminum chassis.
The primary difference between the speakers I designed and the micro- and mini-speakers that Eminence makes is that the diaphragm is connected directly to the voice coil as opposed to an Aluminum or cardboard 'former' to which the voice coil was connected
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS