REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
RituGupta
RituGupta
2/26/2019 8:00:55 PM
User Rank
Newbie
And then..?
I think that what's really going to matter here is how the system is going to respond to increasing temperatures. Finding out that temperatures are climbing , but still useless if you can't actually carry out any actions to regulate the whole system again after you've found out.

50%
50%
michaelmaloney
michaelmaloney
10/21/2018 11:52:11 PM
User Rank
Newbie
hi
It will not be a fair experiment if the only common factor is the exact one that fluctuates. They would have to figure out an alternative setup that will enable the system to still work without having to rely on the sole factor of thermal alone. It isn't fair to rely on a formula that is not stable, thus producing results that lack credibility and truth.

50%
50%


latest blogs
Removing the vuvuzela narrow-band noise was presenting challenges to broadcast engineers
This article discusses how using a single synchronous buck controller can output the most common voltage rails, and accommodate a wide range of operating input voltages from 3V to 40V, and at a reasonable BOM cost.
This article explains how the latest-generation SiC FETs are ideally suited to new inverter designs with lower losses than IGBTs and proven robustness against short circuits, even at high temperatures and under repetitive stress
There’s a further cool thing you can do with a spreadsheet that most SPICEs can’t. That’s to use the spreadsheet ‘solver’ functionality to adjust component values in the search for a better-fitting circuit – or even to find a set of component values for a circuit you can’t otherwise design.
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS