REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
steve.taranovich
steve.taranovich
2/2/2019 11:23:29 AM
User Rank
Blogger
Re: Scope Trigger Generators are Synchronizers
@D Feucht---well spoken from a guy who really knows oscilloscopes

50%
50%
D Feucht
D Feucht
2/2/2019 12:41:02 AM
User Rank
Blogger
Scope Trigger Generators are Synchronizers
Oscilloscope trigger generators are high-performance synchronizers. For lower-speed 'scopes, a delay is placed in the clock path between the first and second of the D flops in the diagram. This gives the first flop output time to settle to a valid logic state within the setup time needed by the second flop so that when the delayed clock comes along, the second flop avoids metastability. The delay time is chosen from the exponential equation to reduce the probability of excessive delay (the metastable state) in achieving a valid output state to an acceptably low value.

Faster scopes use hysteretic RS flops, but that is a longer story ...

 

 

50%
50%


latest blogs
How can you accurately measure this impedance to give reliable lead-off detection in ECGs?
Fast switching transitions can yield some disadvantages. Interference in the frequency range of the switching transitions between approximately 20 MHz and 200 MHz increases dramatically.
The U-channel format consists of an open frame PSU mounted into a U-shaped aluminum chassis.
The primary difference between the speakers I designed and the micro- and mini-speakers that Eminence makes is that the diaphragm is connected directly to the voice coil as opposed to an Aluminum or cardboard 'former' to which the voice coil was connected
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS