REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
AaronHe
AaronHe
3/13/2019 3:24:59 AM
User Rank
Newbie
About the pull-up component
Hi Dean:

How about set the pull-up components as an inductor parallelled with a resistor for example 50 ohm. Choose the inductor value big enough at the working frequency to make the parallelled impedance is almost same as the resistor. And this added inductor will remove the DC voltage drop which could guarantee the output signal will have full voltage swing.

50%
50%


latest blogs
There’s a further cool thing you can do with a spreadsheet that most SPICEs can’t. That’s to use the spreadsheet ‘solver’ functionality to adjust component values in the search for a better-fitting circuit – or even to find a set of component values for a circuit you can’t otherwise design.
Infineon MOSFETs have been embedded into PC boards by Schweizer Electronic AG
You now need to adjust component values to achieve some system goal, such as predefined frequency response or time behaviour, and there’s no closed method for working out those values.
As a member of the electronics design community, I am angry and disappointed with the recent deaths of 346 people due to the Boeing MAX 8 design
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS