REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
AaronHe
AaronHe
3/13/2019 3:24:59 AM
User Rank
Newbie
About the pull-up component
Hi Dean:

How about set the pull-up components as an inductor parallelled with a resistor for example 50 ohm. Choose the inductor value big enough at the working frequency to make the parallelled impedance is almost same as the resistor. And this added inductor will remove the DC voltage drop which could guarantee the output signal will have full voltage swing.

50%
50%


latest blogs
How can you accurately measure this impedance to give reliable lead-off detection in ECGs?
Fast switching transitions can yield some disadvantages. Interference in the frequency range of the switching transitions between approximately 20 MHz and 200 MHz increases dramatically.
The U-channel format consists of an open frame PSU mounted into a U-shaped aluminum chassis.
The primary difference between the speakers I designed and the micro- and mini-speakers that Eminence makes is that the diaphragm is connected directly to the voice coil as opposed to an Aluminum or cardboard 'former' to which the voice coil was connected
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS