REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
MelBrandle
MelBrandle
4/18/2019 12:18:45 AM
User Rank
Newbie
Cut back a little
I would say that it should be fine to cut back just a little, but not completely. I know that whatever new data that has been made readily accessible thus far is endless, but that doesn't mean that we can simply disregard the early discoveries. We can somehow make them work together cohesively if we want to depending on the requirements.

50%
50%
Steam Kid
Steam Kid
4/2/2019 7:54:20 AM
User Rank
Newbie
Filter design
 I would say it is not a case of one or the other, classic filter design teaching gives you the understanding of the technical aspects, which surely still applies with SAW and FBAW filters. And can you obtain AW filters which operate down to the lower frquency range which many people still use? i.e. can you get a SAW notch filter for 50/60Hz filtering?

50%
50%
Popularityseo
Popularityseo
3/28/2019 12:52:02 PM
User Rank
Newbie
Re: Classic Filter Design
The experts I know have been taught by themselves...

50%
50%
OldEngineer_47
OldEngineer_47
3/27/2019 9:21:59 AM
User Rank
Newbie
Classic Filter Design
My experience has been that most engineers with a BS degree do not have adequate training in filter design. Classic Filter design is usually taught as part of a graduate level class. Only through classic filter design can the engineer determine the order and type of the filter required to meet the system level requirements. 

I have encounter several so called experts who design their filters by using the optimization tools within RF circuit simulation programs.

 

50%
50%


latest blogs
A three-part series of articles explains how to minimize interference through proper PCB design and layout.
In such things as laboratory power supplies or electronic systems, in which various components are connected to longer cables, the regulated voltage is not always particularly accurate at the point where it is needed due to various voltage drops across the interconnection lines.
There area plethora of USB Type-C articles out there, but this is the first one I have seen with a really neat design architecture to shrink the board footprint with a high level of integration.
The required selectivity of a customer design implied four-pole filters with about 10% bandwidth (passband width about 10% of the centre frequency). There was a catch---a tight power budget
Monitoring the heart rate or blood pressure in order to enhance the quality of their life, this is known as Remote Patient Monitoring (RPM)
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS