REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
vansunet
vansunet
5/6/2019 12:20:14 AM
User Rank
Newbie
Re: Filter design
The experts I know have been taught by themselves...

50%
50%
Andy_I
Andy_I
5/2/2019 3:49:39 PM
User Rank
Artist
Re: Classic filter design, in college? Really?
BTW, where your title says "classic" filters, my first thought was that you meant constant-K and M-derived filters, which I think were some of the real classics.

50%
50%
Andy_I
Andy_I
5/2/2019 3:41:11 PM
User Rank
Artist
Classic filter design, in college? Really?
I wonder if I entered college at an odd time.  I never had any courses on filter design, and I don't recall there being any in my university's curriculum.  Unlike most of my fellow EE students, I pursued a study that was weighted on the analog end.

What I learned about the more common classic filters, I got from self-study.

You mean they had classes about that stuff?

50%
50%
MelBrandle
MelBrandle
4/18/2019 12:18:45 AM
User Rank
Newbie
Cut back a little
I would say that it should be fine to cut back just a little, but not completely. I know that whatever new data that has been made readily accessible thus far is endless, but that doesn't mean that we can simply disregard the early discoveries. We can somehow make them work together cohesively if we want to depending on the requirements.

50%
50%
Steam Kid
Steam Kid
4/2/2019 7:54:20 AM
User Rank
Newbie
Filter design
 I would say it is not a case of one or the other, classic filter design teaching gives you the understanding of the technical aspects, which surely still applies with SAW and FBAW filters. And can you obtain AW filters which operate down to the lower frquency range which many people still use? i.e. can you get a SAW notch filter for 50/60Hz filtering?

50%
50%
Popularityseo
Popularityseo
3/28/2019 12:52:02 PM
User Rank
Newbie
Re: Classic Filter Design
The experts I know have been taught by themselves...

50%
50%
OldEngineer_47
OldEngineer_47
3/27/2019 9:21:59 AM
User Rank
Newbie
Classic Filter Design
My experience has been that most engineers with a BS degree do not have adequate training in filter design. Classic Filter design is usually taught as part of a graduate level class. Only through classic filter design can the engineer determine the order and type of the filter required to meet the system level requirements. 

I have encounter several so called experts who design their filters by using the optimization tools within RF circuit simulation programs.

 

50%
50%


latest blogs
Removing the vuvuzela narrow-band noise was presenting challenges to broadcast engineers
This article discusses how using a single synchronous buck controller can output the most common voltage rails, and accommodate a wide range of operating input voltages from 3V to 40V, and at a reasonable BOM cost.
This article explains how the latest-generation SiC FETs are ideally suited to new inverter designs with lower losses than IGBTs and proven robustness against short circuits, even at high temperatures and under repetitive stress
There’s a further cool thing you can do with a spreadsheet that most SPICEs can’t. That’s to use the spreadsheet ‘solver’ functionality to adjust component values in the search for a better-fitting circuit – or even to find a set of component values for a circuit you can’t otherwise design.
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS