REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
markgrogan
markgrogan
4/2/2019 1:44:22 AM
User Rank
Newbie
DO your best!
Well of course we would need to figure out how best to configure a system so that the least amount of power is required by the system. The amount of electrical power can be controlled if we are careful about placement and systems used on the switchboard or anywhere else on the whole network for that matter! We just need to be more diligent about it if we want to increase efficiency!

50%
50%


latest blogs
How can you accurately measure this impedance to give reliable lead-off detection in ECGs?
Fast switching transitions can yield some disadvantages. Interference in the frequency range of the switching transitions between approximately 20 MHz and 200 MHz increases dramatically.
The U-channel format consists of an open frame PSU mounted into a U-shaped aluminum chassis.
The primary difference between the speakers I designed and the micro- and mini-speakers that Eminence makes is that the diaphragm is connected directly to the voice coil as opposed to an Aluminum or cardboard 'former' to which the voice coil was connected
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS