REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
steve.taranovich
steve.taranovich
4/10/2019 5:52:22 PM
User Rank
Blogger
Re: Squeak
@Morgan Beaglemann---I agree---I am getting IT to look at fixing the font to make it black---thanks for the comment

50%
50%
Morgan Beaglemann
Morgan Beaglemann
4/10/2019 3:52:46 PM
User Rank
Student
Re: Squeak
Thanks! Was not the schematic, but the light grey of the text against the white background! I ended up printing it to read. Have a good one, Mart

50%
50%
studleylee
studleylee
4/10/2019 3:42:43 PM
User Rank
Newbie
Re: Squeak
If you do a ctrl-mousewheel on the clicked image you can zoom enough to read it's blurriness. The LTspice schematic says it all so not really worth mentioning.

It's interesing how the older articles don't really follow the schematic conventions of today

The circuit is much more recognizable if the gnd and -9v(gnd=>+9v and -9v=>gnd) labels are swapped and the entire thing redrawn upside down with respect to the original.

The signal souce and output load then ref'd to the 'new' gnd.

 

50%
50%
Morgan Beaglemann
Morgan Beaglemann
4/10/2019 9:47:40 AM
User Rank
Student
Squeak
Great article on a topic I have never heard of. Only one problem, the font is of a grey-like color and is difficult to read; in fact neigh impossible to read. I havd to take the time to print in order to make it readible.

Art and creativity are one thing, but aren't you supposed to get the message across? Isn't that why we communicate?

Respectfully,

Martin

0%
100%


latest blogs
A three-part series of articles explains how to minimize interference through proper PCB design and layout.
In such things as laboratory power supplies or electronic systems, in which various components are connected to longer cables, the regulated voltage is not always particularly accurate at the point where it is needed due to various voltage drops across the interconnection lines.
There area plethora of USB Type-C articles out there, but this is the first one I have seen with a really neat design architecture to shrink the board footprint with a high level of integration.
The required selectivity of a customer design implied four-pole filters with about 10% bandwidth (passband width about 10% of the centre frequency). There was a catch---a tight power budget
Monitoring the heart rate or blood pressure in order to enhance the quality of their life, this is known as Remote Patient Monitoring (RPM)
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS