REGISTER | LOGIN
Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Comments
Newest First | Oldest First | Threaded View
Tucson_Mike
Tucson_Mike
5/3/2019 9:13:33 AM
User Rank
Blogger
Open loop to closed loop mapping
Not too sure what you are saying, maybe talking about the internal open loop gain which nominally has a 1 pole frequency response. One of the points is the modern FDAs have multiple open loop poles that (when you go closed loop) depart from the simple gain bandwidth product idea in the close loop response shape. Actually, mapping from the LG to the expected close loop response has been too simplified with the gain bandwidth product idea where the curves I put into Insight #5 get a lot closer. The LG sims here capture all of that in what is actually a > 5th order system if you include the open loop output impedance effects. When I was doing the THS4551 TINA model, the open loop gain is a dominant pole and then 2nd order poles at higher F (and some other things). That plus the open loop output impedance into the RC load and feedback C's pushes you over 5th order, so no equations will help there, but the LG sims map to closed loop responses pretty well. 

50%
50%
freddydayne111
freddydayne111
5/3/2019 4:34:23 AM
User Rank
Newbie
good
The FDA gain calculated at DC does not apply at higher frequencies. To a first approximation, the gain of a typical FDA is inversely proportional to frequency. This means that an FDA is characterized by its gain-bandwidth product. See to buy essays. For example, an FDA with a gain bandwidth product of 1 MHz would have a gain of 5 at 200 kHz, and a gain of 1 at 1 MHz. This low-pass characteristic is introduced deliberately, because it tends to stabilize the circuit by introducing a dominant pole. This is known as frequency compensation.

50%
50%


latest blogs
The utilization of electronics in medical applications could effectively enhance the quality of life of patients and prevent many cardiovascular distresses: this is confirmed by the result of an observational study, about the CPAP device
This blog series deals with the potential of the utilization of smart electronic ICs in medical care applications; these ICs are produced by companies in the field of semiconductors such as STMicroelectronics which has a broad portfolio of ICs for medical applications
There is rising interest in alternative energy schemes and electric vehicles (EVs) which means there is a growing need in making it possible for power to flow efficiently in both directions.
The industries sector is progressively increasing utilization of IoT technology to make the industrial processes automated in a very intelligent way.
Medical care applications with electronic devices are becoming progressively more important and massively adopted.
flash poll
educational resources
 
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS