Home    Bloggers    Blogs    Article Archives    Messages    About Us   
Tw  |  Fb  |  In  |  Rss
Newest First | Oldest First | Threaded View
5/3/2019 9:13:33 AM
User Rank
Open loop to closed loop mapping
Not too sure what you are saying, maybe talking about the internal open loop gain which nominally has a 1 pole frequency response. One of the points is the modern FDAs have multiple open loop poles that (when you go closed loop) depart from the simple gain bandwidth product idea in the close loop response shape. Actually, mapping from the LG to the expected close loop response has been too simplified with the gain bandwidth product idea where the curves I put into Insight #5 get a lot closer. The LG sims here capture all of that in what is actually a > 5th order system if you include the open loop output impedance effects. When I was doing the THS4551 TINA model, the open loop gain is a dominant pole and then 2nd order poles at higher F (and some other things). That plus the open loop output impedance into the RC load and feedback C's pushes you over 5th order, so no equations will help there, but the LG sims map to closed loop responses pretty well. 

5/3/2019 4:34:23 AM
User Rank
The FDA gain calculated at DC does not apply at higher frequencies. To a first approximation, the gain of a typical FDA is inversely proportional to frequency. This means that an FDA is characterized by its gain-bandwidth product. See to buy essays. For example, an FDA with a gain bandwidth product of 1 MHz would have a gain of 5 at 200 kHz, and a gain of 1 at 1 MHz. This low-pass characteristic is introduced deliberately, because it tends to stabilize the circuit by introducing a dominant pole. This is known as frequency compensation.


latest blogs
Autonomous driving represents one of the most interesting fields of research in the electronics and automotive sectors. This interest is growing by means of projects like the “Roobopoli” which includes the design and testing of prototype autonomous cars having integrated microcontrollers.
Using optimization to design circuits (some might call it organized guesswork – for some algorithms, that’s a pretty good description) isn’t a new insight.
The future of industry is represented by the massive utilization of IoT technology in realizing a more effective and reliable chain of production while maximizing the yield of industrial processes
How could I measure the light intensity of different light sources?
Here, model testing steps will be shown for the VFA then external adjustments to match reported data sheet numbers will be shown
flash poll
educational resources
follow Planet Analog on Twitter
Planet Analog Twitter Feed
like us on facebook
our partners
Planet Analog
About Us     Contact Us     Help     Register     Twitter     Facebook     RSS